post:
postbus 5706
3290 AA Strijen
bezoek:
Edisonweg 32
3291 CK Strijen
t: 078-6743320
f: 078-6745022
Sony SVT-100P
- 4 different time lapse rec/playback modes
- Adaptive Picture Control (APC)
- Audio recording and playback in 3, 12 and 24 hour modes
- Built in time and date generator
- Various recording modes
- Alarm recall and scan functions
- Holiday setting function
- Daylight saving time setting function
- Recording check function
- Field-by-field picture playback capability
- On-screen display
- Auto head cleaning function
- Tape before-end signal
- Power failure protection for up to 30 days
- Security lock functions
- External control capability via RS-232C
- Interface
GENERAL
- Mass: 5.5 kg
- Dimensions (W x H x D): 420 x 100 x 349 mm
- Power requirements: AC 220V to 240V, 50/60Hz
- Power consumption: 18 W
- Operating temperature: 5șC to 40șC
- Operating humidity: 80% or less
SYSTEM
- Video signal: CCIR standard (monochrome) / PAL (colour)
- Tape speed: 23.39 mm/sec (3-hour mode)
- Recording/playback time: 3, 12, 24, 48 and 72 hours (E-180 tape)
- Alarm recording speed: 3, 12-hour mode, No change during alarm
- Alarm recording duration: 20s, 1m, Continuous during alarm
- Fast forward/rewind time: Approx. 4min. (E-180 tape)
- VIDEO Recording system: Rotary two-head helical scanning system
- Luminance signal: FM recording
- Colour signal: Low-pass band-pass transformation direct recording
- Input: BNC x 1: 1 Vp-p, 75 Ohm, unbalanced, sync negative
- Output: BNC x 1: 1 Vp-p, 75 Ohm, unbalanced, sync negative
- S/N Ratio: 43dB
- Horizontal resolution: Colour: More than 240TV lines
- Monochrome: More than 320TV lines
AUDIO
- Audio recording system: Monaural
- Audio recording mode: 3, 12 and 24 hour mode
- Input: Phono x 1: -7.8dBu, 47 kOhm
- Output: Phono x 1: -7.8dBu, 600 Ohm
- Microphone Input: 3.5mm Mini x 1: -60 dBu, 600 Ohm
- Distortion: Less than 3% (3-hour mode)
- Audio S/N Ratio: 43dB (3-hour mode)
OTHERS
- Alarm input: Terminal trip x 1: Low level
- Alarm output: Terminal trip x 1: +5V, 5.7kOhm (low active)
- Switch output: Terminal trip x 1: +5V, 5.7kOhm (low active)
- Tape end output: Terminal trip x 1: +5V, 5.7kOhm (low active)
- Warning output: Terminal trip x 1: +5V, 5.7kOhm (low active)
- External timer input: Terminal trip x 1: Low level
- Remote control input: 3.5mm Mini x 1
